7733 datasheet(406/940 Pages) RENESAS

Part #	7733

Description	16-BIT SINGLE-CHIP MICROCOMPUTER

PDF	940 Pages

Scroll/Zoom	100%

Manufacturer	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

406 / 940 page

STANDARD CHARACTERISTICS

16.1 Standard characteristics

7733 Group User’s Manual

16–5

16.1.4 A-D converter standard characteristics

The lower lines of the graph indicate the absolute precision errors. These are expressed as the deviation

from the ideal value when the output code changes. For example, the change in output code from “0E16”

to “0F16” should occur at 72.5 mV, but the measured value is 0.6 mV. Accordingly, the measured point of

change is 72.5 + 0.6 = 73.1 mV.

The upper lines of the graph indicate the input voltage width for which the output code is constant. For

example, the measured input voltage width for which the output code is “0F16” is 4.7 mV. Accordingly, the

differential non-linear error is 4.7 – 5.0 = –0.3 mV (–0.06LSB).

[Measurement condition]

• VCC = AVCC = 5 V, • VREF = 5.12 V, • f(XIN) = 25 MHz, • Ta = 25 °C

7733 Datasheet(PDF) 406 Page - Renesas Technology Corp