7733 datasheet(934/940 Pages) RENESAS

934 / 940 page

Rev.

No.

date

1.00

First Edition

970425

2.00

The following are revised.

980731

REVISION DESCRIPTION LIST

7733/7735/7736 Group User’s Manual

(1)

Revision Description

Page

PART 1

P2-8

(2) Bit 1:

Zero flag (Z)

PART 1

P2-19

Fig. 2.4.1

PART 1

P21-30

PART 1

P2-21

Fig. 2.4.3

PART 1

P21-3

Fig. 2

PART 2

P21-4

Fig. 2

PART 3

P20-4

Fig. 2

PART 1

P6-47

Line 23

Previous Version

This flag is ignored for an addition instruction in

the decimal mode (the ADC instruction).

Notes 1: •••••

2: When changing these bits, this change

must be performed in an area which is

internal ROM area before and after this

change, for example addresses

008000 16 to 00FFFF16. Also, when

changing these bits, be sure to follow the

procedure listed below.

3: In the M37733S4BFP, M37733S4LHP,

M37735S4BFP, or M37735S4LHP, writ-

ing to address 6316 is disabled.

Omitted.

Revised Version

This flag is ignored for an addition and subtrac-

tion instructions (the ADC and the SBC

instructions) in the decimal mode.

Notes 1: •••••

2: When changing these bits, this change

must be performed in an area which is

internal ROM area before and after this

change, for example addresses

00C00016 to 00FFFF16. Also, when

changing these bits, be sure to follow the

procedure listed below.

3: This figure is applied only to the

H37733MHBXXXFP. For the other mi-

crocomputers, please refer to the latest

datasheets on the English document CD-

ROM or our Web site.

Refer to pages 2 and 3.

Functions

0 0 0 : 124 K (00100016 ‘01FFFF16)

0 0 1 : 120 K (00200016 ‘01FFFF16)

0 1 0 : Do not select.

0 1 1 : Do not select.

1 0 0 : Do not select.

1 0 1 : Do not select.

1 1 0 : 96 K (00800016 ‘01FFFF16)

1 1 1 : 32 K (00800016 ‘00FFFF16)

b2 b1 b0

ROM size (addresses)

Functions

0 0 0 : 124 Kbytes,

3968 bytes

0 0 1 : 120 Kbytes,

3968 bytes

0 1 0 : 60 Kbytes,

2048 bytes

0 1 1 : Do not select.

1 0 0 : 32 Kbytes,

2048 bytes

1 0 1 : 16 Kbytes,

2048 bytes

1 1 0 : 96 Kbytes,

3968 bytes

1 1 1 : Do not select.

b2 b1 b0

ROM size

RAM size

2: When the counter operates as an 8-bit pulse

width modulator, after a trigger occurs, pin

TAiOUT outputs “L” level of which width is

the same as the PWM pulse’s “H” level width

which was set. And then, pin TAiOUT starts

the PWM pulse output.

2: When the counter operates as an 8-bit pulse

width modulator, pin TAiOUT outputs “L”

level of which width is the same as the PWM

pulse’s “H” level width which was set. And

then, pin TAiOUT starts the PWM pulse

output.

7733 Datasheet(PDF) 934 Page - Renesas Technology Corp

7733 Datasheet(HTML) 934 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL