7733 datasheet(289/940 Pages) RENESAS

289 / 940 page

A-D CONVERTER

7733 Group User’s Manual

9–24

A-D conversion is started.

Setting of the port P7 direction register

Port P7 direction register (address 11 16)

Set bits corresponding to selected

analog input pins to “0.”

When an external trigger is selected,

set bit 7 to “0.”

AN0

Trigger is generated.

Falling edges input to Pin

ADTRG

When external trigger is selected

When internal trigger is

selected

Setting of the A-D conversion start flag to “1”

A-D control register 0 (address 1E 16)

A-D conversion start flag

Setting of the A-D control registers 0, 1

A-D control register 0 (address 1E 16)



: It may be “0” or “1.”

f2: Refer to chapter “14. CLOCK GENERATING CIRCUIT.”

A-D control register 1 (address 1F 16)

A-D sweep pin selection bits

b1b0

0 0: AN0 and AN1 (2 pins)

0 1: AN0 to AN3 (4 pins)

1 0: AN0 to AN5 (6 pins)

1 1: AN0 to AN7 (8 pins)

Trigger selection bit

0: Internal trigger

1: External trigger

A-D conversion start flag

0: A-D conversion is stopped.

A-D conversion frequency (

) selection flag

0: f2/4

1: f2/2

Selection of the single sweep mode

VREF connection selection bit

0: Pin VREF is connected.

Note: Writing to each bit (except bit 6) of the A-D control register 0 and each bit of the A-D

control register 1 must be performed while A-D converter stops operating, in

other words, before a trigger is generated.

When the VREF connection selection bit is cleared from “1” to “0,” wait for an

interval of 1 s or more passed, and then generate a trigger.

Setting of the interrupt priority level

A-D/UART2 trans./rece. interrupt control register (address 70 16)

Interrupt priority level selection bits

When using interrupts, one of levels 1 to 7 must be set.

When disabling interrupts, level 0 must be set.

AN5

AN1

AN2

AN3

AN4

8/10-bit mode selection bit

0: 8-bit resolution

1: 10-bit resolution

AN7

AN6

Fig. 9.7.1 Initial setting example for registers related to single sweep mode

9.7 Single sweep mode



7733 Datasheet(PDF) 289 Page - Renesas Technology Corp

7733 Datasheet(HTML) 289 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL