| Electronic Components Datasheet Search |
|
TMDS361 Datasheet(PDF) 24 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMDS361 Datasheet(HTML) 24 Page - Texas Instruments |
|
24 / 42 page ![]() RSCL RSDA TSCL TSDA OVS R T B0344-01 TSCL/TSDA RSCL/RSDA Vcc 0.5V 5V + 10% Vcc/2 t PLH DDC I 2C Behavior Master Slave DriverR Driver T V Rdd R Rup C CABLE C SOURCE C I C O C slave V Tdd R Tup C medium TMDS361 SLLS919 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com Figure 28. I2C Drivers in the TMDS361 (R Side Is the HDMI Source Side, T Side Is the HDMI Sink Side) When the T side is pulled below 0.4 V by an external I2C driver, both drivers R and T are turned on. Driver R pulls the R side to near 0 V, and driver T is on, but is overridden by the external I2C driver. If driver T is already on, due to a low on the R side, driver R just turns on. When the T side is released by the external I2C driver, driver T is still on, so the T side is only able to rise to the VOL of driver T. Driver R turns off, because VOL is above its 0.4-V VIL threshold, releasing the R side. If no external I2C driver is keeping the R side low, the R side rises, and driver T turns off once the R side rises above 1.5 V, see Figure 29. Figure 29. Waveform of Driver T Turning Off It is important that any external I2C driver on the T side is able to pull the bus below 0.4 V to achieve full operation. If the T side cannot be pulled below 0.4 V, driver R may not recognize and transmit the low value to the R side. The typical application of the TMDS361 is as a 3×1 switch in a TV connecting up to three HDMI input sources to an HDMI receiver. The I2C repeater is 5-V tolerant, and no additional circuitry is required to translate between 3.3-V and 5-V bus voltages. In the following example, the system master is running on an R-side I2C-bus while the slave is connected to a T-side bus. Both buses run at 100 kHz, supporting standard-mode I2C operation. Master devices can be placed on either bus. Figure 30. Typical Application 24 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s) :TMDS361 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |