| Electronic Components Datasheet Search |
|
TMS370 Datasheet(PDF) 14 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TMS370 Datasheet(HTML) 14 Page - Texas Instruments |
|
14 / 77 page ![]() TMS370Cx5x 8-BIT MICROCONTROLLER SPNS010F – DECEMBER 1986 – REVISED FEBRUARY 1997 14 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 data EEPROM (continued) Writing to the data EEPROM module is controlled by the data EEPROM control register (DEECTL) and the write-protection register (WPR). Programming algorithm examples are available in the TMS370 Family User’s Guide (literature number SPNU127) or the TMS370 Family Data Manual (literature number SPNS014B). The data EEPROM features include the following: D Programming: – Bit, byte, and block write/erase modes – Internal charge pump circuitry. No external EEPROM programming voltage supply is needed. – Control register: Data EEPROM programming is controlled by the data EEPROM control register (DEECTL) located in the PF frame beginning at location P01A. – In-circuit programming capability: There is no need to remove the device to program it. D Write-protection: Writes to the data EEPROM are disabled during the following conditions: – Reset: All programming of the data EEPROM module is halted. – Write protection active: There is one write-protect bit per 32-byte EEPROM block. – Low-power mode operation D Write protection can be overridden by applying 12 V to MC. Table 8 shows the memory map of the control registers. Table 8. Data EEPROM and Program EPROM Control Registers Memory Map ADDRESS SYMBOL NAME P014 EPCTLH Program EPROM control register – high array P015 – P016 Reserved P017 INT1 External interrupt 1 control register P018 INT2 External interrupt 2 control register P019 INT3 External interrupt 3 control register P01A DEECTL Data EEPROM control register P01B Reserved P01C EPCTLM Program EPROM control register – middle array P01D Reserved P01E EPCTLL Program EPROM control register – low array For the 16K-byte EPROM device, program memory is controlled by P01C; for the 32K-byte EPROM device, the program memory is controlled by P01C and P01E; for the 48K-byte EPROM device, the program memory is controlled by P014, P01C, and P01E. program EPROM The ‘370C756 consists of a 16K-byte array of EPROM at address locations 4000h through 7FFFh. The ‘370C758 consists of 32K bytes made up of two 16K-byte arrays of EPROM; the first 16K-bytes array is located at address locations 2000h through 5FFFh, and the second 16K byte array is located at address locations 6000h through 9FFFh. The ’370C759 consists of 48K bytes that is made up of three 16K byte arrays of EPROM; the first 16K bytes array is located at address locations 2000h through 5FFFh, the second 16K-byte array is located at address locations 6000h through 9FFFh, the third 16K-byte array is located at address locations A000h through DFFFh (see Figure 3). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |