`

Copyright © 2010 Future Technology Devices International Limited

8

Document Reference No.: FT_000254

VNC2 Debug Module Datasheet Version 1.1

Clearance No.: FTDI# 149

3.6 Confirm Debug Connection Using IDE

Having connected the VNC2 debug module to the VNC2 hardware, a user can verify the operation of the

debug interface operation using the Vinculum II IDE development software.

Simply connect the debug module to a PC via the mini-B USB connector. Open the Vinculum II IDE

software. Under the ‘Debug’ tab the ‘VII Debugger Module’ should be listed as an available debug

interface. Once detected, users can now use the VNC2 debug module to debug code and program the

VNC2 device.

Figure 3.4 VNC2 Connection Confirmation on Vinculum-II IDE