Data Sheet

ADIS16480

Rev. 0 | Page 5 of 40

Parameter

Test Conditions/Comments

Min

Typ

Max

Unit

POWER SUPPLY, VDD

Operating voltage range

3.0

3.6

V

Power Supply Current9

Normal mode, VDD = 3.3 V, µ ± σ

254

mA

Sleep mode, VDD = 3.3 V

12.2

mA

Power-down mode, VDD = 3.3 V

45

µA

POWER SUPPLY, VDDRTC

Operating voltage range

3.0

3.6

V

Real-Time Clock Supply Current

Normal mode, VDDRTC = 3.3 V

13

µA

1

Accuracy specifications assume calibration of accelerometers and magnetometers to address sensor drift and local influences on magnetic fields.

2

The relative error assumes that the initial error, at 25°C, is corrected in the end application.

3

Linearity errors assume a full scale (FS) of 1000 mbar.

4

The digital I/O signals are driven by an internal 3.3 V supply, and the inputs are 5 V tolerant.

5

Endurance is qualified as per JEDEC Standard 22, Method A117, and measured at −40°C, +25°C, +85°C, and +125°C.

6

7

These times do not include thermal settling, internal filter response times, or EKF start-up times (~825 ms), which may affect overall accuracy, with respect to time.

8

The device functions at clock rates below 0.7 kHz, but at reduced performance levels.

9

Supply current transients can reach 450 mA for 400 µs during start-up and reset recovery.