Ribbon cable

keyed to mate

with connector

Notch in

connector

Note that the ribbon

cable points away

from the notch

www.ti.com

Expanding the System Size

The next step in expanding the physical system size is to connect the slave ribbon cable to the master;

this step is illustrated in Figure 24. Make sure to match the key on the ribbon cable with the notch in the

connector.

Figure 24. Connect the Ribbon Cable to the Master

23

SBOU087A

– August 2010 – Revised April 2011

Multi-Cal-System Evaluation Module

Submit Documentation Feedback

Copyright

© 2010–2011, Texas Instruments Incorporated