APL3200 datasheet(18/24 Pages) ANPEC

Part #	APL3200

Description	Dual-Input, USB/AC Adapter, 1-Cell Li Charger with OVP and Thermal Regulation

PDF	24 Pages

Scroll/Zoom	100%

Manufacturer	ANPEC [Anpec Electronics Coropration]

Direct Link	http://www.anpec.com.tw

Logo

18 / 24 page

Rev. A.5 - Apr., 2009

APL3200

www.anpec.com.tw

Applicaiton Information (Cont.)

Thermal Consideration (Cont.)

PCB Layout Consideration

The APL3200 is packaged in a thermally enhanced QFN

package. The package includes a thermal pad to provide

an effective thermal contact between the device and the

printed circuit board. Connecting the exposed pad to a

large copper ground plane on the backside of the circuit

board through several thermal vias for heatsinking is

recommended. Connecting the battery to BATT as close

to the device as possible provides accurate battery volt-

age sensing. All decoupling capacitors and filter capaci-

tors should be placed as close as possible to the device.

The high-current charge paths into DC, DCLV, USB, and

from the BATT pins must short and wide to minimize volt-

age drops.

D=(VDCLV-VBATT) x ICHG_DC (or ICHG_USB)

APL3200 Datasheet(PDF) 18 Page - Anpec Electronics Coropration