| Electronic Components Datasheet Search |
|
UPC1876 Datasheet(PDF) 15 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPC1876 Datasheet(HTML) 15 Page - NEC |
|
15 / 40 page ![]() µPC1876 15 Data Sheet S11666EJ4V0DS00 2.2 SAP Demodulation Block (1) SAP BPF Picks up the SAP signal by the 50 kHz and 102 kHz traps, and response peak at 5 fH. Adjust the current value output from the FLTA pin for the filter response. (2) Noise BPF The µPC1876 monitors signals picked up by noise BPF (fO ≅ 180 kHz), and distinguish noises from signals. By this method, the µPC1876 prevents misoperating on SAP detection in a weak electric field. Adjust the current value output from the FLTA pin for the filter response. (3) Noise detector Performs full-wave rectification of noise which has passed through noise BPF to change it to the DC voltage and input it to comparator. When the noise level exceeds the reference level, the stereo LED and SAP LED are turned off, and the stereo and SAP demodulation are stopped. Adjust the value of the resistor and capacitor connected to the NDT pin for the sensitivity and time constant of the noise detection circuit. (4) SAP detector Performs synchronized detection of the SAP signal which has passed through the SAP BPF, and smoothes it with the SDT pin and input it to the comparator. When receiving the SAP signal, the SAP LED is turned on. (5) SAP demodulator The SAP demodulator consists of the phase detector, loop filter, and SAP VCO (PLL detection circuit). The SAP VCO oscillates at 10 fH, and performs phase comparison between the signal divided by 2 of the SAP VCO frequency and the SAP signal to make the PLL loop. Adjust the current value output from the SAPVA pin for the frequency of the SAP VCO. (6) SAP LPF Eliminates the SAP carrier and higher frequency buzz. The filter consists of a secondary LPF and fH trap filter. Adjust the current value output from the FLTA pin for the filter response. 2.3 dbx Noise Reduction Block All the filters required for the TV-dbx noise reduction are incorporated. Adjust the current value output from the FLTA pin for these filter responses. (1) LPF The LPF has traps at fH and 24 kHz each. The fH trap filter minimizes interference to the dbx noise reduction by the fH signal which is not synchronized with the pilot signal (e.g. leakage of the synchronous idle and buzz from the video signal). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |