SM8213 datasheet(23/33 Pages) NPC

23 / 33 page

SM8213AM

NIPPON PRECISION CIRCUITS—23

Address Set Flags

In the SM8213AM, each of the 8 independent

addresses can be assigned a frame.

Address settings are made in 8 batches in write mode

immediately after power is applied and immediately

after reset (9 batches total, including the parameter

batch). All batches should be set. If not all batches

are set, subsequent operation may become unstable.

Also, an address setting can be modiﬁed during nor-

mal operation, 1 address at a time, with no adverse

effects.

Ensure that there are not multiple writes requests to

turn ON the same address.

Bits 1 to 7

These bits form the address set command.

Bit 8

These bits are the address (bits 9 to 32) enable ﬂags.

When 1, the address set by bits 9 to 32 are valid.

When 0, the address set by bits 9 to 32 are invalid.

Bits 9 to 11

These bits are the address (bits 15 to 32) call sign set

ﬂags.

Using 8-address control, the call signs are A, B, C,

D, E, F, G and H.

Bits 12 to 14

These bits are the address (bits 15 to 32) frame

assign ﬂags.

Any frame can be assigned individually to any of the

8 controllable addresses. Up to 8 frames can be

assigned.

Bits 15 to 32

Address bits.

The 18-bit address should be written with MSB ﬁrst.

Table 6. Address set ﬂags

Bit

Address setting ﬂag

ADDRESS ENABLE

ADDRESS 2 (ADDR 2)

ADDRESS 1 (ADDR 1)

ADDRESS 0 (ADDR 0)

FRAME 2 (FR 2)

FRAME 1 (FR 1)

FRAME 0 (FR 0)

A11

A12

A13

A14

A15

A16

A17

A18

ADDR 2

ADDR 1

ADDR 0

Name

000

001

010

011

100

101

110

111

FR 2

FR 1

FR 0

Frame

Frame 0

Frame 1

Frame 2

Frame 3

Frame 4

Frame 5

Frame 6

Frame 7

SM8213 Datasheet(PDF) 23 Page - Nippon Precision Circuits Inc

SM8213 Datasheet(HTML) 23 Page - Nippon Precision Circuits Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Datasheet Download

Link URL