AM1705DPTP3 datasheet(39/165 Pages) TI1

39 / 165 page

AM1705

www.ti.com

SPRS657E – FEBRUARY 2010 – REVISED JUNE 2014

6.2

Recommended Clock and Control Signal Transition Behavior

All clocks and control signals must transition between VIH and VIL (or between VIL and VIH) in a monotonic

manner.

6.3

Power Supplies

6.3.1

Power-on Sequence

The device should be powered-on in the following order:

1. Core logic supplies:

(a) CVDD core logic supply

(b) Other 1.2V logic supplies (PLL0_VDDA). Groups 1a) and 1b) may be powered up together or 1a)

first followed by 1b).

2. All 1.8V IO supplies (USB0_VDDA18).

3. All digital IO and analog 3.3V PHY supplies (DVDD, USB0_VDDA33 ).

Group 2) and group 3) may be powered on in either order [2 then 3, or 3 then 2] but group 3) must be

powered-on after the core logic supplies.

There is no specific required voltage ramp rate for any of the supplies.

RESET must be maintained active until all power supplies have reached their nominal values.

6.3.2

Power-off Sequence

The power supplies can be powered-off in any order as long as the 3.3V supplies do not remain powered

with the other supplies unpowered.

Peripheral Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Links: AM1705

AM1705DPTP3 Datasheet(PDF) 39 Page - Texas Instruments