LP8555 datasheet(28/64 Pages) TI1

28 / 64 page

'0'

Slave Address

(7 bits)

Control Register Add.

(8 bits)

R/W

From Master to Slave

From Slave to Master

A - ACKNOWLEDGE (SDA Low)

S - START CONDITION

P - STOP CONDITION

Data transfered,

byte + Ack

LP8555

SNVS857 – FEBRUARY 2014

www.ti.com

8.3.7.6 Control Register Write Cycle

•

Master device generates start condition.

•

Master device sends slave address (7 bits) and the data direction bit (r/w = 0).

•

Slave device sends acknowledge signal if the slave address is correct.

•

Master sends control register address (8 bits).

•

Slave sends acknowledge signal.

•

Master sends data byte to be written to the addressed register.

•

Slave sends acknowledge signal.

•

If master will send further data bytes, the control register address will be incremented by one after

acknowledge signal.

•

Write cycle ends when the master creates stop condition.

8.3.7.7 Control Register Read Cycle

•

Master device generates a start condition.

•

Master device sends slave address (7 bits) and the data direction bit (r/w = 0).

•

Slave device sends acknowledge signal if the slave address is correct.

•

Master sends control register address (8 bits).

•

Slave sends acknowledge signal.

•

Master device generates repeated start condition.

•

Master sends the slave address (7 bits) and the data direction bit (r/w = 1).

•

Slave sends acknowledge signal if the slave address is correct.

•

Slave sends data byte from addressed register.

•

If the master device sends acknowledge signal, the control register address will be incremented by one. Slave

device sends data byte from addressed register.

•

Read cycle ends when the master does not generate acknowledge signal after data byte and generates stop

condition.

ADDRESS MODE

Data Read

<Slave Address><r/w = '0'>[Ack]

<Register Addr.>[Ack]

<Slave Address><r/w = '1'>[Ack]

[Register Data]<Ack or Nack>...additional reads from subsequent register address possible

Data Write

<Slave Address><r/w = '0'>[Ack]

<Register Addr.>[Ack]

<Register Data>[Ack]...additional writes to subsequent register address possible

<> Data from master; [ ] Data from slave.

Figure 41. Register Write Format

Submit Documentation Feedback

Product Folder Links: LP8555

LP8555 Datasheet(PDF) 28 Page - Texas Instruments

LP8555 Datasheet(HTML) 28 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL