GXM datasheet(160/244 Pages) NSC

160 / 244 page

www.national.com

160

Revision 3.1

Integrated Functions (Continued)

Index 41h

PCI Control Function 2 Register (R/W)

Default Value = 96h

7RSVD

Reserved: Set to 0.

6RW_CLK

RAW Clock: A debug signal used to view internal clock operation. 0 = Disable; 1 = Enable.

5PFS

PERR# forces SERR#: PCI master drives an active SERR# anytime it also drives or receives an active

PERR#: 0 = Disable; 1 = Enable.

4XWB

X-Bus to PCI Write Buffer: Enable GXm processor PCI master’s X-Bus write buffers (non-locked mem-

ory cycles are buffered, I/O cycles and lock cycles are not buffered): 0 = Disable; 1 = Enable.

3:2

SDB

Slave Disconnect Boundary: PCI slave issues a disconnect with data when it crosses line boundary:

00 = 128 bytes

01 = 256 bytes

10 = 512 bytes

11 = 1024 bytes

Works in conjunction with bit 1.

1SDBE

Slave Disconnect Boundary Enable:

0 = PCI slave disconnects on boundaries set by bits [3:2].

1 = PCI disconnects on cache line boundary which is 16 bytes.

0XWS

X-Bus Wait State Enable: The PCI slave acting as a master on the X-bus will insert wait states on write

cycles for data setup time. 0 = Disable; 1 = Enable.

Index 43h

PCI Arbitration Control 1 Register (R/W)

Default Value = 80h

7BG

Bus Grant:

0 = Grants bus regardless of X-bus buffers.

1 = Grants bus only if X-bus buffers are empty.

6RSVD

Reserved: Set to 1.

5RME2

REQ2# Retry Mask Enable: Arbiter allows the REQ2# to be masked based on the master retry mask in

bits [2:1]: 0 = Disable; 1 = Enable.

4RME1

REQ1# Retry Mask Enable: Arbiter allows the REQ1# to be masked based on the master retry mask in

bits [2:1]: 0 = Disable; 1 = Enable.

3RME0

REQ0# Retry Mask Enable: Arbiter allows the REQ0# to be masked based on the master retry mask in

bits [2:1]: 0 = Disable; 1 = Enable.

2:1

MRM

Master Retry Mask: When a target issues a retry to a master, the arbiter can mask the request from the

retried master in order to allow other lower order masters to gain access to the PCI bus:

00 = No retry mask

01 = Mask for 16 PCI clocks

10 = Mask for 32 PCI clocks

11 = Mask for 64 PCI clocks

0HXR

Hold X-bus on Retries: Arbiter holds the X-Bus X_HOLD for two additional clocks to see if the retried

master will request the bus again: 0 = Disable; 1 = Enable

(This may prevent retry thrashing in some cases.)

Table 4-40. PCI Configuration Registers (Continued)

Bit

Name

Description

GXM Datasheet(PDF) 160 Page - National Semiconductor (TI)

GXM Datasheet(HTML) 160 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL