FN8158 Rev 5.00

Page 17 of 18

October 28, 2016

X9110

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 2005-2016. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com.

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

Reliability reports are also available from our website at www.intersil.com/support.

warranted. Please visit our website to make sure that you have the latest revision.

DATE

REVISION

CHANGE

October 28, 2016

FN8158.5

Added Related Literature section on page 1.

August 3, 2016

FN8158.4

Updated entire datasheet applying Intersil’s new standards.

Updated Note 1 and added Note 3.

Changed the maximum limit for parameter Vcc Current (standby) ISB from 3µA to 5µA on page 11.

Added Revision History and About Intersil sections.

Updated POD to latest revision changes are as follows:

Updated drawing to remove table and added land pattern.