15 / 25 page

AT2004
4 Channels ADPCM Processor with Echo Cancellation and Conferencing
Page 15 of 25
©2001 Atelic System, Inc
Using the AT2004 with other combo chips
AT2004
Combo 0
DX
DR
Combo 1
Combo 2
Combo 3
XIN(16)
FSY(25)
SYNC.1(18)
YOUT(24)
CLKP(17)
SYNC2(15)
SYNC3(11)
SYNC4(10)
(20)XOUT
(27)YIN
TM1
TM0
When there are multiple AT2004 used on the same systems, A1, A0 are used to identify the chip.
A1, A0 are for chip ID. Values are from 00-03. They should be connected to microcontroller I/O lines or wired to either
VCC or ground.
Note:
SDI, SCLK, SCSZ are for 3-wire commands and should be connected to microcontroller I/O pins.
CLKA and FSY.
Typical application of default setting uses National single channel Combo (Quad Combo can be used to replace
the 4 single Combo)
CLKA
SDI
SCLK
SCSZ