RF to IF Dual Downconverting Mixer

3400MHz –3800MHz

IDT Zero-Distortion

TM Mixer

18

Rev1, December 2014

IDTF1178NBGI

Datasheet

DIGITAL PIN VOLTAGE & RESISTANCE VALUES

Pin

Name

DC voltage (volts)

Resistance (ohms)

22

STBY1

5

50K

24

STBY2

Floating voltage

Open Circuit

POWER SUPPLIES

A common VCC power supply should be used for all pins requiring DC power. All supply pins should be bypassed with

external capacitors to minimize noise and fast transients. Supply noise can degrade noise figure and fast transients

can trigger ESD clamps and cause them to fail. Supply voltage change or transients should have a slew rate smaller

than 1V/20uS. In addition, all control pins should remain at 0V (+/-0.3V) while the supply voltage ramps or while it

returns to zero.