| Electronic Components Datasheet Search |
|
ADT7467 Datasheet(PDF) 33 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADT7467 Datasheet(HTML) 33 Page - Analog Devices |
|
33 / 80 page ![]() ADT7467 Rev. 0| Page 33 of 80 XNOR TREE TEST MODE The ADT7467 includes an XNOR tree test mode. This mode is useful for in-circuit test equipment at board-level testing. By applying stimulus to the pins included in the XNOR tree, it is possible to detect opens or shorts on the system board. Figure 47 shows the signals that are exercised in the XNOR tree test mode. The XNOR tree test is invoked by setting Bit 0 (XEN) of the XNOR tree test enable register (Reg. 0x6F). PWM1/XTO PWM3 PWM2 TACH4 TACH3 TACH2 TACH1 Figure 47. XNOR Tree Test POWER-ON DEFAULT When the ADT7467 is powered up, it polls the VCCP input. If VCCP stays below 0.75 V (the system CPU power rail is not powered up), then the ADT7467 assumes the functionality of the default registers after the ADT7467 is addressed via any valid SMBus transaction. If VCC goes high (the system processor power rail is powered up), then a fail-safe timer begins to count down. If the ADT7467 is not addressed by any valid SMBus transaction before the fail- safe timeout (4.6 s) lapses, then the ADT7467 drives the fans to full speed. If the ADT7467 is addressed by a valid SMBus transaction after this point, the fans stop, and the ADT7467 assumes its default settings and begins normal operation. If VCCP goes high (the system processor power rail is powered up), then a fail-safe timer begins to count down. If the ADT7467 is addressed by a valid SMBus transaction before the fail-safe timeout (4.6 s) lapses, then the ADT7467 operates normally, assuming the functionality of all the default registers. See the flow chart in Figure 48. ADT7467 IS POWERED UP HAS THE ADT7467 BEEN ACCESSED BY A VALID SMBUS TRANSACTION? IS VCCP ABOVE 0.75V? CHECK VCCP START FAIL-SAFE TIMER HAS THE ADT7467 BEEN ACCESSED BY A VALID SMBUS TRANSACTION? FAIL-SAFE TIMER ELAPSES AFTER THE FAIL-SAFE TIMEOUT HAS THE ADT7467 BEEN ACCESSED BY A VALID SMBUS TRANSACTION? START UP THE ADT7467 NORMALLY RUN THE FANS TO FULL SPEED HAS THE ADT7467 BEEN ACCESSED BY A VALID SMBUS TRANSACTION? SWITCH OFF FANS N N N N N Y Y Y Y Y Figure 48. Power-On Flow Chart |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |