TI recommends using 2 capacitors across GVDD and GND: a low capacitance ceramic surface-mount capacitor

for high-frequency filtering placed very close to GVDD and GND pins, and another high capacitance value

surface-mount capacitor for IC bias requirements. In a similar manner, the current pulses delivered by the GH

pin are sourced from the BST pin. Therefore, a local decoupling capacitor is recommended between the BST

and SH pins.

LM2005

SNVSCB6B – FEBRUARY 2023 – REVISED SEPTEMBER 2023

www.ti.com

18

Submit Document Feedback

Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM2005