| Electronic Components Datasheet Search |
|
MAX8745 Datasheet(PDF) 5 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAX8745 Datasheet(HTML) 5 Page - Maxim Integrated Products |
|
5 / 36 page ![]() High-Efficiency, Quad Output, Main Power- Supply Controllers for Notebook Computers _______________________________________________________________________________________ 5 ELECTRICAL CHARACTERISTICS (continued) (Circuit of Figure 1, VIN = 12V, both SMPS enabled, FSEL = REF, SKIP = GND, ILIM = LDO5, FBA = LDO5, IREF = ILDO5 = IOUTA = no load, TA = 0°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Output Undervoltage Protection Trip Threshold With respect to error-comparator threshold 65 70 75 % Output Undevoltage Fault Propagation Delay tUVP 50mV overdrive 10 µs Output Undervoltage Protection Blanking Time tBLANK From rising edge of ON_ with respect to fSW 5000 6144 7000 1/fOSC PGOOD_ Lower Trip Threshold With respect to error-comparator threshold, hysteresis = 1% (typ) -12 -10 -8 % Falling edge, 50mV overdrive 10 PGOOD_ Propagation Delay tPGOOD_ Rising edge, 50mV overdrive 1 µs PGOOD_ Output Low Voltage ISINK = 1mA 0.4 V PGOOD_ Leakage Current IPGOOD_ High state, PGOOD_ forced to 5.5V 1 µA Thermal-Shutdown Threshold tSHDN Hysteresis = 15°C +160 °C GATE DRIVERS DH_ Gate-Driver On-Resistance RDH BST_ – LX_ forced to 5V 1.3 5 Ω DL_, high state 1.7 5 DL_ Gate-Driver On-Resistance RDL DL_, low state 0.6 3 Ω DH_ Gate-Driver Source/Sink Current IDH DH_ forced to 2.5V, BST_ – LX_ forced to 5V 2A DL_ Gate-Driver Source Current IDL (SOURCE) DL_ forced to 2.5V 1.7 A DL_ Gate-Driver Sink Current IDL (SINK) DL_ forced to 2.5V 3.3 A DH_low to DL_high 15 45 Dead Time tDEAD DL_low to DH_high 15 44 ns Internal BST_ Switch On- Resistance RBST IBST = 10mA 5 Ω BST_ Leakage Current VBST_ = 26V 2 20 µA INPUTS AND OUTPUTS Rising trip level 1.1 1.6 2.2 SHDN Input Trip Level Falling trip level 0.96 1 1.04 V High 2.4 ONA Logic Input Voltage Hysteresis = 600mV (typ) Low 0.8 V SMPS off level/clear fault level 0.8 Delay start level 1.9 2.1 ON3, ON5 Input Voltage SMPS on level 2.4 V |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |