GWH3 datasheet(9/40 Pages) CLARKE

9 / 40 page

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY DEVICES

Safety devices such as interlocks and circuit breakers should not be disconnected or

shunted out. Before installation, inspection, or service of equipment, shut off all

power and remove line fuses (or lock or red-tag switches) to prevent accidental

turning ON of power. DO NOT open power circuit or change polarity while welding. If,

in an emergency, it must be disconnected, guard against shock burns, or flash from

switch arcing. Always shut OFF and disconnect all power to equipment. A power

disconnect switch must be available near the welding power source.

PREPARATION OF THE WORKING AREA

The working area must be sufficiently spacious, not humid, and well-ventilated as to

avoid any fumes which develop from the welding process and from incidental material

adhering to the pieces to be welded (oils, paints, tars...) which may cause danger to

the operator.

Avoid welding tanks which may contain flammable residuals.

WARNING: ELECTRIC SHOCK CAN BE FATAL. A PERSON QUALIFIED

IN FIRST AID SHOULD ALWAYS BE PRESENT IN THE WORKING

AREA. IF PERSON IS UNCONSCIOUS AND ELECTRIC SHOCK IS

SUSPECTED, DO NOT TOUCH THE PERSON IF HE OR SHE IS IN

CONTACT WITH THE WELDER OR CABLES. DISCONNECT THE

WELDER FROM THE POWER SOURCE AND THEN USE FIRST AID. DRY

WOOD OR OTHER INSULATING MATERIAL CAN BE USED TO MOVE

CABLES, IF NECESSARY, AWAY FROM THE PERSON.

GWH3 Datasheet(PDF) 9 Page - Clarke International