 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
M66596FP Datasheet(PDF) 1 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M66596FP Datasheet(HTML) 1 Page - Renesas Technology Corp |
|
|
1 / 131 page  M66596FP/WG ASSP (USB2.0 Dual Function Controller) rev .1.00 2006.3.14 page 1 of 127 REJ03F0119-0100Z Rev 1.00 2006.3.14 1 Overview 1.1 Overview The M66596 is a USB (Universal Serial Bus) Rev. 2.0 host and peripheral controller that supports USB Hi-Speed and Full-Speed transfers. This controller has a built-in USB transceiver and supports all of the transfer types defined by the USB specification. M66596 has a compact package and is pin compatible with the peripheral controller M66592. The M66596 has a 5 kB built-in buffer memory for data transfers and enables use of up to eight pipes. For pipes 1 to 7, any endpoint numbers can be assigned, based on the user’s system. The controller can be connected to the CPU using either a separate bus or a multiplex bus. Moreover, a split bus interface (dedicated external DMA interface) is provided independent of the CPU bus interface, making this an ideal choice for systems that require transfer of large volumes of data at high speed. 1.2 Features 1.2.1 Built in USB Hi-Speed host and peripheral controller • USB Hi-Speed host and peripheral controllers are built in 1 chip. • Both Hi-Speed transfer (480Mbps) and Full-Speed transfer (12Mbps) are supported • It is possible to change host or peripheral mode by register setup. • Built-in Hi-Speed / Full-Speed USB transceiver 1.2.2 Reduced power consumption • 1.5 V core power supply, and selectable bus interface power supply 3.3V or 1.8V. • Low power consumption makes this ideal for mobile devices • Low-power mode (power-saving sleep state) supported to reduce power consumption during suspended operation 1.2.3 Small package • Compact 64-pin package used • Pin compatible with Renesas Technology Hi-Speed peripheral controller M66596. • Few external elements are used, so less space is required for mounting - VBUS signal can be connected directly to the controller pin - Built-in D+ pull-up resistor(Peripheral mode) - Built-in D+ and D- pull-down resistor(Host mode) - Built-in D+ and D- terminating resistors (for Hi-Speed operation) - Built-in D+ and D- output resistors (for Full-Speed operation) 1.2.4 Isochronous transfer supported All types of USB transfers supported - Control transfers - Bulk transfers - Interrupt transfers (High-Bandwidth transfers are not supported) - Isochronous transfers (High-Bandwidth transfers are not supported) |
Similar Part No. - M66596FP |
|
Similar Description - M66596FP |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
