SH7018 datasheet(131/431 Pages) RENESAS

131 / 431 page

115

• Bit 3—TGR Interrupt Enable D (TGIED): Enables or disables interrupt TGFD requests when

the TGFD bit of the channel 0 of the TSR register is set to 0.

This bit is reserved for channels 1 and 2. It is always read as 0. The write value should always

be 0.

Bit 3: TGIED

Description

Disable interrupt requests (TGID) due to the TGFD bit

(Initial value)

Enable interrupt requests (TGID) due to the TGFD bit

• Bit 2—TGR Interrupt Enable C (TGIEC): Enables or disables TGFC interrupt requests when

the TGFC bit of the Channel 0 of the TSR register is set to 1.

This bit is reserved for channels 1 and 2. It is always read as 0. The write value should always

be 0.

Bit 2: TGIEC

Description

Disable interrupt requests (TGIC) due to the TGFC bit

(Initial value)

Enable interrupt requests (TGIC) due to the TGFC bit

• Bit 1—TGR Interrupt Enable B (TGIEB): Enables or disables TGFB interrupt requests when

the TGFB bit of the TSR register is set to 1.

Bit 1: TGIEB

Description

Disable interrupt requests (TGIB) due to the TGFB bit

(Initial value)

Enable interrupt requests (TGIB) due to the TGFB bit

• Bit 0—TGR Interrupt Enable A (TGIEA): Enables or disables TGFA interrupt requests when

the TGFA bit of the TSR register is set to 1.

Bit 0: TGIEA

Description

Disable interrupt requests (TGIA) due to the TGFA bit

(Initial value)

Enable interrupt requests (TGIA) due to the TGFA bit

SH7018 Datasheet(PDF) 131 Page - Renesas Technology Corp