SH7052 datasheet(245/919 Pages) RENESAS

245 / 919 page

219

10.2.4

Timer I/O Control Registers (TIOR)

The timer I/O control registers (TIOR) are 8-bit registers. The ATU-II has 16 TIOR registers: one

for channel 0, four each for channels 1 and 2, two each for channels 3 to 5, and one for channel 11.

For details of channel 10, see section 10.2.26, Channel 10 Registers.

Channel

Abbreviation

Function

TIOR0

ICR0 edge detection setting

TIOR1A to 1D

GR input capture/compare-match switching, edge detection/

TIOR2A to 2D

output value setting

TIOR3A, TIOR3B

GR input capture/compare-match switching, edge detection/

TIOR4A, TIOR4B

output value setting, TCNT3 to TCNT5 clear enable/disable

TIOR5A, TIOR5B

setting

TIOR11

GR input capture/compare-match switching, edge

detection/output value setting

Each TIOR is an 8-bit readable/writable register used to select the functions of dedicated input

capture registers and general registers.

For dedicated input capture registers (ICR), TIOR performs edge detection setting.

For general registers (GR), TIOR selects use as an input capture register or output compare

disabling of free-running counter (TCNT) clearing in the event of a compare-match.

Timer I/O Control Register 0 (TIOR0)

Bit:

IO0D1

IO0D0

IO0C1

IO0C0

IO0B1

IO0B0

IO0A1

IO0A0

Initial value:

R/W:

R/W

TIOR0 specifies edge detection for input capture registers ICR0A to ICR0D.

TIOR0 is initialized to H'00 by a power-on reset, and in hardware standby mode and software

standby mode.

SH7052 Datasheet(PDF) 245 Page - Renesas Technology Corp

SH7052 Datasheet(HTML) 245 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL