DM385 datasheet(162/281 Pages) TI

162 / 281 page

MAX(orV

MAX)

ref

MIN(orV

MIN)

ref

TransmissionLine

4.0pF

1.85pF

Z0=50

(seeNote)

TesterPinElectronics

DataSheetTimingReferencePoint

Output

Under

Test

NOTE: The data sheet provides timing at the device pin. For output timing analysis, the tester pin electronics and its transmission line effects must be

taken into account. A transmission line with a delay of 2 ns can be used to produce the desired transmission line effect. The transmission line is

intended as a load only. It is not necessary to add or subtract the transmission line delay (2 ns) from the data sheet timings.

Input requirements in this data sheet are tested with an input slew rate of < 4 Volts per nanosecond (4 V/ns) at the device pin.

3.5nH

DevicePin

(seeNote)

DM385, DM388

SPRS821D – MARCH 2013 – REVISED DECEMBER 2013

www.ti.com

Peripheral Information and Timings

8.1

Parameter Information

Figure 8-1. Test Load Circuit for AC Timing Measurements

The load capacitance value stated is only for characterization and measurement of AC timing signals. This

load capacitance value does not indicate the maximum load the device is capable of driving.

8.1.1

1.8-V and 3.3-V Signal Transition Levels

All input and output timing parameters are referenced to Vref for both "0" and "1" logic levels. For 3.3-V I/O,

Vref = 1.5 V. For 1.8-V I/O, Vref = 0.9 V.

Figure 8-2. Input and Output Voltage Reference Levels for AC Timing Measurements

All rise and fall transition timing parameters are referenced to VIL MAX and VIH MIN for input clocks, VOL

MAX and VOH MIN for output clocks.

Figure 8-3. Rise and Fall Transition Time Voltage Reference Levels

8.1.2

3.3-V Signal Transition Rates

All timings are tested with an input edge rate of 4 volts per nanosecond (4 V/ns).

162

Peripheral Information and Timings

Submit Documentation Feedback

Product Folder Links: DM385 DM388

DM385 Datasheet(PDF) 162 Page - Texas Instruments

DM385 Datasheet(HTML) 162 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL