08 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet

Precision time base 86100D option PTB or 86107A

86107A Option 010

86107A Option 020

86107A Option 040

86100D-PTB

Trigger bandwidth

2.0 to 15.0 GHz

2.4 to 25.0 GHz

2.4 to 48.0 GHz

2.4 to 44 GHz

Typical jitter (RMS) using 86100D

2.4 GHz: < 150 fs

2.4 GHz: < 150 fs

2.4 GHz: < 150 fs

2.4 to 4 GHz < 200 fs

10 GHz: < 100 fs

10, 20 GHz: < 100 fs

10, 20, 40 GHz: < 100 fs 4 to 9 GHz < 120 fs

9 to 44 GHz < 90 fs

Typical jitter (RMS) using 86100D

2.4 GHz: < 280 fs

2.4 GHz: < 280 fs

2.4 GHz: < 280 fs

2.4 to 5 GHz < 400 fs

10 GHz: < 200 fs

10, 20 GHz: < 200 fs

10, 20, 40 GHz: < 200 fs 5 to 10 GHz < 300 fs

10 to 44 GHz < 200 fs

Time base linearity error

< 200 fs

Input signal type

Input signal level

0.5 to 1.0 Vpp

0.2 to 1.5 Vpp (typical functional performance)

DC offset range

Required trigger signal-to-noise ratio

≥ 200: 1

Trigger impedance (nominal)

50 Ω

3.5 mm (male)

3.5 mm (male)

2.4 mm (male)

1. Filtering provided for Option 010 bands 2.4 to 4.0 GHz and 9.0 to 12.6 GHz, for Option 020 9.0 to 12.6 GHz and 18 to 25.0 GHz, for Option 40 9.0 to

12.6 GHz, 18.0 to 25.0 GHz, and 39.0 to 48.0 GHz. Within the filtered bands, a synchronous clock signal should be provided (Clock, sinusoid, BERT trigger,

etc.). Outside these bands, filtering is required to minimize harmonics and sub harmonics and provide a sinusoid to the 86107 input. (Not required for

86100D-PTB).

2. For the 86107A with Option 020, the Keysight 11742A (DC block) is recommended if the DC offset magnitude is greater than 200 mV.

3. Ships with female-female connector saver(s).

4. With 86107A module, or 86100D-PTB, and an 861xx, N1045 Option LOJ, or N1055A module (electrical channel).

5. With 86107A module, or 86100D-PTB, and 54xxx, 8348x, and N1045A plug-in modules.

6. If an 86107A module is used in an 86100D frame with Option PTB, the internal precision timebase is disabled.

Precision time base operation and integrated precision timebase

Measurement performance can be further enhanced by adding precision time base

capability to the 86100 mainframe. The precision time base reduces the intrinsic jitter

of the scope and is recommended when analyzing high-speed data signals. Precision

timebase capability is achieved using the 86107A precision timebase plug-in module or

integrating the precision timebase system within the 86100D mainframe (86100D Option

Specifications (Continued)