86115D2 datasheet(25/37 Pages) KEYSIGHT

25 / 37 page

25 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet

Low Cost Manufacturing Solutions

Get 86100 DCA accuracy with a test solution designed

specifically for manufacturing. The Keysight 86100 DCA family

is recognized as the industry standard for verifying optical

transmitter compliance to communications standards. For

years engineers have trusted the DCA for easy and accurate

measurement of their digital communications waveforms. The

new N1090A/B/C and N1092A/B/D build on that legacy by using

the high-performance elements of both the 86100 oscilloscope

mainframe acquisition system and the optical channels. Designed

specifically for high-volume manufacturing test applications, the

N109X provides the measurement accuracy of the 86100 but

without the extra cost associated with an R&D test solution. The

N109X is a complete measurement system in a compact low-cost

form factor. The N1090A is used for testing optical signals from 1

to 11 Gb/s. The N1092A/B/D are used for testing optical signals

from 20 to 28 Gb/s. Be confident that your test results will never

be questioned when performed with the N109X as end users of

your transceivers are likely to use similar accurate, high-quality

test systems to verify component performance. The N109X is

intended to operate as a standalone system, but can also be

operated as an extended 86100D module connected by USB to a

DCA-X mainframe.

Software Applications

86100D-200 enhanced jitter analysis

Option 200 provides extensive and accurate jitter decomposition,

which is increasingly important as data rates increase and

margins reduce. Quickly customize your view of many parameters

and take advantage of advanced features such as jitter spectrum

analysis.

86100D-201 advanced waveform analysis

Take advantage of powerful features in Option 201 to generate

much deeper waveform files, integrate MATLAB analysis, and use

the built-in linear feed-forward equalizer.

86100D-202enhancedimpedanceandS-parameter

Option 202 works in TDR mode and provides live S-parameter

responses, including magnitude (return loss, insertion loss, etc.),

phase and group delay. Single-ended, differential and mixed-

mode responses are available simultaneously. Also enables quick

and easy saving of measurement results in Touchstone files (.s2p,

.s4p, etc.).

86100D-300 amplitude analysis/RIN/Q-factor

Extend the many capabilities from jitter mode into the amplitude

domain and see the decomposition of the amplitude into several

factors. Option 300 also reports relative intensity noise (RIN) and

Q-factor.

86100D-400 PLL and jitter spectrum

Option 400 quickly characterizes key parameters of phase-locked

loops and provides the jitter spectrum of your signal including

spread spectrum clocks. Control of the jitter source and receiver

is integrated to ensure fast results.

86100D-401 advanced EYE analysis

For device testing with long patterns and to obtain BER-contour

mask testing, Option 401 integrates with the classic or FlexDCA

interfaces to decompose the jitter and amplitude interference

measurements into the key parameters. When using the

embedded capability within FlexDCA or the included automation

application, you may characterize jitter on simultaneous multiple

lanes and obtain concise and visual results.

86100D-9FP PAM-N analysis software

Accurately and quickly analyze Pulse Amplitude Modulation

(PAM) signals as described in IEEE 802.3bj Clause 94 and

developing standards such as OIF-CEI-56G and IEEE 400G.

86115D2 Datasheet(PDF) 25 Page - Keysight Technologies

86115D2 Datasheet(HTML) 25 Page - Keysight Technologies

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Datasheet Download

Link URL