SC2200 datasheet(241/433 Pages) NSC

241 / 433 page

Revision 3.0

241

www.national.com

Core Logic Module (Continued)

Offset 1Ch-1Fh

LPC_ERR_SMI — LPC Error SMI Register (R/W)

Reset Value: 00000080h

31:12

Reserved. Must be set to 0.

LPCPD# Override Enable. Determines how LPCPD# output is controlled.

0: ACPI logic.

1: LPCPD# Override Value bit (bit 10 of this register).

LPCPD# Override Value. Selects value of LPCPD# output if bit 11 of this register is set to 1.

0: Power down sequence.

1: Normal power.

SMISerialIRQ Enable. Allows serial IRQ to generate an SMI.

0: Disable.

1: Enable.

Top Level SMI status is reported at F1BAR0+I/O Offset 02h[3].

Second level status is reported at bit 6 of this register.

SMI Configuration for LPC Error Enable. Allows LPC errors to generate an SMI.

0: Disable.

1: Enable.

Top Level SMI status is reported at F1BAR0+I/O Offset 02h[3].

Second level status is reported at bit 5 of this register.

LPCPD# Pin Status. (Read Only) Reflects the current value of the LPCPD# output signal.

SMI SourceisSerial IRQ. Indicates whether or not an SMI was generated by an SERIRQ.

0: No.

1: Yes.

Write 1 to clear.

To enable SMI generation, set bit 9 of this register to 1.

This is the second level of status reporting. The top level status is reported in F1BAR0+I/O Offset 02h[3].

Writing a 1 to this bit also clears the top level status bit as long as bit 5 of this register is cleared.

LPC Error Status. Indicates whether or not an SMI was generated by an error that occurred on LPC.

0: No.

1: Yes.

Write 1 to clear.

To enable SMI generation, set bit 8 of this register to 1.

This is the second level of status reporting. The top level status is reported in F1BAR0+I/O Offset 02h[3].

Writing a 1 to this bit also clears the top level status bit as long as bit 6 of this register is cleared.

LPC Multiple Errors Status. Indicates whether or not multiple errors have occurred on LPC.

0: No.

1: Yes.

Write 1 to clear.

LPC Timeout Error Status. Indicates whether or not an error was generated by a timeout on LPC.

0: No.

1: Yes.

Write 1 to clear.

LPC Error Write Status. Indicates whether or not an error was generated during a write operation on LPC.

0: No.

1: Yes.

Write 1 to clear.

LPC Error DMA Status. Indicates whether or not an error was generated during a DMA operation on LPC.

0: No.

1: Yes.

Write 1 to clear.

Table 5-31. F0BAR1+I/O Offset: LPC Interface Configuration Registers (Continued)

Bit

Description

SC2200 Datasheet(PDF) 241 Page - National Semiconductor (TI)

SC2200 Datasheet(HTML) 241 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL