LTC7821

34

Rev A

For more information www.analog.com

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

PACKAGE DESCRIPTION

Please refer to http://www.linear.com/product/LTC7821#packaging for the most recent package drawings.

5.00 ±0.10

(4 SIDES)

NOTE:

1. DRAWING PROPOSED TO BE A JEDEC PACKAGE OUTLINE

M0-220 VARIATION WHHD-(X) (TO BE APPROVED)

2. DRAWING NOT TO SCALE

3. ALL DIMENSIONS ARE IN MILLIMETERS

4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE

MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.20mm ON ANY SIDE

5. EXPOSED PAD SHALL BE SOLDER PLATED

6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION

ON THE TOP AND BOTTOM OF PACKAGE

PIN 1

TOP MARK

(NOTE 6)

0.40 ±0.10

31

1

2

32

BOTTOM VIEW—EXPOSED PAD

3.50 REF

(4-SIDES)

3.45 ±0.10

3.45 ±0.10

0.75 ±0.05

R = 0.115

TYP

0.25 ±0.05

(UH32) QFN 0406 REV D

0.50 BSC

0.200 REF

0.00 – 0.05

0.70 ±0.05

3.50 REF

(4 SIDES)

4.10 ±0.05

5.50 ±0.05

0.25 ±0.05

PACKAGE OUTLINE

0.50 BSC

RECOMMENDED SOLDER PAD LAYOUT

APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED

PIN 1 NOTCH R = 0.30 TYP

OR 0.35 × 45° CHAMFER

R = 0.05

TYP

3.45 ±0.05

3.45 ±0.05

UH Package

32-Lead Plastic QFN (5mm × 5mm)

(Reference LTC DWG # 05-08-1693 Rev D)