AS3956 datasheet(83/109 Pages) AMSCO

83 / 109 page

ams Datasheet

Page 83

[v1-10] 2018-Apr-27

Document Feedback

AS3956 − Detailed Description

Restart Transceiver

Resets protocol logic to its initial state except for the tag state.

This interrupts all receptions and transmissions that are being

processed at the time.

Disable/Enable Transceiver

This direct command toggles internal states which enables or

disables the reception or transmission of the data. This

command should be used when MCU wants to disable the

interruption of EEPROM write/read over SPI / I²C by the received

RF write/read command. This command shall not change the

tag state. Please note that power-up and EEPROM arbitration

interrupts are still produced when the transceiver is disabled.

The transceiver state (ON/OFF) is ON after power -up of the chip,

but after that the transceiver state can only be determined from

the initial state (ON) and the number of Disable/Enable

transceiver toggle commands that have been sent to the chip.

Transmit Buffer

This direct command trigger the transmission of data stored in

the buffer over the RF link. Before issuing a Transmit command,

the MCU shall send a Clear Buffer command, and write into the

buffer the data to be transmitted by sending a Buffer Load

command.

Execution of this direct command is only enabled when the

AS3956 antenna coil is in a PCD field (VP_INT is above HF_PON

threshold) and AS3956 Extended or Tunneling modes are

enabled.

Transmit ACK

Transmit 4-bit ACK response.

Transmit NACK 0-5

Transmit 4-bit NACK response with different NACK codes.

Go To Sleep

Puts tag in SLEEP state. Execution of this direct command is only

enabled when AS3956 antenna coil is in a NFC device field (VP_

INT is above HF_PON threshold).

Go To Sense

Puts tag in SENSE state. Execution of this direct command is

only enabled when the AS3956 antenna coil is in a NFC device

field (VP_INT is above HF_PON threshold).

Go To Sense / Sleep

Puts tag in SLEEP state depending on the internal state of the

tag. Execution of this direct command is only enabled when

AS3956 antenna coil is in a NFC device field (VP_INT is above

HF_PON threshold).

AS3956 Datasheet(PDF) 83 Page - ams AG

AS3956 Datasheet(HTML) 83 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL