Data Sheet

LTC9101-2A/LTC9102

ELECTRICAL CHARACTERISTICS

analog.com

Rev. 0 | 9 of 34

Note 14: tPON is measured from end of valid detect.

Note 15: Port current measurements depend on sense resistor value (0.1Ω typical). See the External Component Selection section for details.

Note 16: See Inrush Control for details on inrush threshold selection.

Note 17: ADC characteristics and typical performance are described in terms of LTC9102 hardware capability. Measurements from LTC9102

are processed and synthesized by the LTC9101-2A. Refer to the LTC9101-2A software interface data sheet for register descriptions and LSB

weights, as presented to the user (port current, port voltage, VEE voltage, and system temperature).