| Electronic Components Datasheet Search |
|
POWERSTEP01 Datasheet(PDF) 55 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
POWERSTEP01 Datasheet(HTML) 55 Page - STMicroelectronics |
|
55 / 92 page ![]() DocID025022 Rev 5 55/92 powerSTEP01 Programming manual 92 11.1.8 MIN_SPEED The MIN_SPEED register contains the following parameters: The MIN_SPEED parameter contains the speed profile minimum speed. Its value is expressed in step/tick and to convert it in step/s the following formula can be used: Equation 8 where MIN_SPEED is the integer number stored in the register and tick is the ramp 250 ns. The available range is from 0 to 976.3 step/s with a resolution of 0.238 step/s. When the LSPD_OPT bit is set high, low speed optimization feature is enabled (voltage mode driving only) and the MIN_SPEED value indicates the speed threshold below which the compensation works. In this case the minimum speed of the speed profile is set to zero. Any attempt to write the register when the motor is running causes the CMD_ERROR flag to rise. 11.1.9 FS_SPD The FS_SPD register contains the following parameters: The FS_SPD threshold speed value over which the step mode is automatically switched to full-step two-phase on. Its value is expressed in step/tick (format unsigned fixed point 0.18) and to convert it in step/s the following formula can be used: Equation 9 If FS_SPD value is set to hFF (max.) the system always works in Microstepping mode (SPEED must go over the threshold to switch to Full-step mode). Setting FS_SPD to zero does not have the same effect as setting the step mode to full-step two-phase on: the zero FS_SPD value is equivalent to a speed threshold of about 7.63 step/s. The available range is from 7.63 to 15625 step/s with a resolution of 15.25 step/s. The BOOST_MODE bit sets the amplitude of the voltage squarewave during the full-step operation (see Section on page 24). Table 14. MIN_SPEED register Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 LSPD_OPT MIN_SPEED step/s MIN_SPEED 2 24 – tick --------------------------------------------------- = Table 15. FS_SPD register Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 BOOST_MODE FS_SPD step/s FS_SPD 0.5 + 2 18 – tick ----------------------------------------------------------- = |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |