LAN9211 datasheet(123/147 Pages) SMSC

123 / 147 page

High-Performance Small Form Factor Single-Chip Ethernet Controller with HP Auto-MDIX Support

Datasheet

SMSC LAN9211

123

Revision 2.9 (03-01-12)

DATASHEET

5.5.10

Special Control/Status Indications

Index (In Decimal):

Size:

16-bits

ADDRESS

DESCRIPTION

MODE

DEFAULT

Override AMDIX Strap

0 - AMDIX_EN (pin 52) enables or disables HP Auto MDIX

1 - Override pin 52. PHY Register 27.14 and 27.13 determine MDIX

function

Auto-MDIX Enable: Only effective when 27.15=1, otherwise ignored.

0 = Disable Auto-MDIX. 27.13 determines normal or reversed connection.

1 = Enable Auto-MDIX. 27.13 must be set to 0.

Auto-MDIX State. Only effective when 27.15=1, otherwise ignored.

When 27.14 = 0 (manually set MDIX state):

0 = no crossover (TPO = output, TPI = input)

1 = crossover (TPO = input, TPI = output)

When 27.14 = 1 (automatic MDIX) this bit must be set to 0.

Do not use the combination 27.15=1, 27.14=1, 27.13=1.

12:11

Reserved: Write as 0. Ignore on read.

VCOOFF_LP: Forces the Receive PLL 10M to lock on the reference clock

at all times:

0 - Receive PLL 10M can lock on reference or line as needed (normal

operation)

1 - Receive PLL 10M is locked on the reference clock.

In this mode 10M data packets cannot be received.

RW,

NASR

9-5

Reserved: Write as 0. Ignore on read.

XPOL: Polarity state of the 10Base-T:

0 - Normal polarity

1 - Reversed polarity

3:0

Reserved: Read only - Writing to these bits have no effect.

XXXXb

LAN9211 Datasheet(PDF) 123 Page - SMSC Corporation

LAN9211 Datasheet(HTML) 123 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL