RO58 datasheet(12/41 Pages) INFINEON

12 / 41 page

User Manual

12 of 41

Revision 1.4

2019-10-11

EVAL-M3-CM615PN User Manual

iMOTION™ Modular Application Design Kit

Getting Started with EVAL-M3-CM615PN

9. Import system drive parameters file (generated in step 5) into MCEDesigner by clicking “File” > “Import Drive

Parameters”. Select “Update All” radio button.

10. Program the MCE Firmware and system parameters into the internal Flash memory of iMOTION™ IC by

clicking “Tools > Programmer “in the pull down menu, and then clicking on the “Program Firmware and

Parameter” radio button. See chapter MCEDesigner setup overview setion 4.2.2 for more details. If the latest

version of MCE firmware is already programmed into the IMC102T-F064 IC, then programming firmware can

be skipped by selecting “Program Parameters” radio button option. Finally click “Start” button to program

firware and parameter (or parameters only when programming firmware was skipped).

11. Start the motor by clicking the green traffic light button in the control bar.

RO58 Datasheet(PDF) 12 Page - Infineon Technologies AG