| Electronic Components Datasheet Search |
|
CC1352P Datasheet(PDF) 7 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
CC1352P Datasheet(HTML) 7 Page - Texas Instruments |
|
7 / 64 page ![]() Table 6-1. Signal Descriptions – RGE Package (continued) PIN I/O TYPE DESCRIPTION NAME NO. VDDS 11 — Power 1.71-V to 3.8-V DIO supply(5) DIO24_A7 12 I/O Digital or Analog GPIO, Analog capability, high-drive capability RSTN 13 I Digital Reset, active low. No internal pullup resistor DIO3_X32P 14 I/O Digital or Analog GPIO, 32-kHz crystal oscillator pin 1, Optional TCXO input DIO4_X32N 15 I/O Digital or Analog GPIO, 32-kHz crystal oscillator pin 2 VDDD 16 — Power For decoupling of internal 1.28-V regulated core-supply. Connect an external 1 μF decoupling capacitor.(2) DCDC 17 — Power Switching node of internal DC/DC converter(5) VDDS 18 — Power 1.71-V to 3.8-V analog supply(5) DIO6_A1 19 I/O Digital or Analog GPIO, analog capability VDDR 20 — Power Internal supply, must be powered from the internal DC/DC converter or the internal LDO. Connect an external 10 μF decoupling capacitor.(2) (3) (4) X48P 21 — Analog 48-MHz crystal oscillator pin 1 X48N 22 — Analog 48-MHz crystal oscillator pin 2 GND 23 — GND Ground VDDS 24 — Power 1.71-V to 3.8-V analog supply(5) (1) EGP is the only non-RF ground connection for the device. Good electrical connection to PCB ground plane is required for proper device operation. (2) Do not supply external circuitry from this pin. (3) VDDR pins 2 and 20 must be tied together on the PCB. (4) Output from internal DC/DC and LDO is trimmed to 1.5 V. (5) For more details, see technical reference manual listed in Section 10.3. 6.3 Connections for Unused Pins and Modules – RGE Package Table 6-2. Connections for Unused Pins – RGE Package FUNCTION SIGNAL NAME PIN NUMBER ACCEPTABLE PRACTICE(1) PREFERRED PRACTICE(1) GPIO (digital) DIOn 3–6 NC, GND, or VDDS NC SWD DIO16_SWDIO 7 NC, GND, or VDDS GND or VDDS DIO17_SWDCK 8 NC, GND, or VDDS GND or VDDS GPIO (digital or analog) DIOn_Am 9–10 12 19 NC, GND, or VDDS NC 32.768-kHz crystal DIO3_X32P 14 NC or GND NC DIO4_X32N 15 DC/DC converter(2) DCDC 17 NC NC VDDS 11, 18, 24 VDDS VDDS (1) NC = No connect (2) When the DC/DC converter is not used, the inductor between DCDC and VDDR can be removed. VDDR must still be connected and the 10 μF DCDC capacitor must be kept on the VDDR net. www.ti.com CC2340R2 SWRS282 – FEBRUARY 2024 Copyright © 2024 Texas Instruments Incorporated Submit Document Feedback 7 Product Folder Links: CC2340R2 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |