| Electronic Components Datasheet Search |
|
LLCC68 Datasheet(PDF) 90 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
LLCC68 Datasheet(HTML) 90 Page - Semtech Corporation |
|
90 / 106 page ![]() LLCC68 Data Sheet Rev. 1.0 DS.LLCC68.W.APP July 2019 90 of 106 Semtech www.semtech.com 13.5 Communication Status Information These commands return the information about the chip status, and received packet such a packet length, received power during packet, several flags indicating if the packet as been correctly received. The returned parameters differ for the LoRa® protocol. 13.5.1 GetStatus The host can retrieve chip status directly through the command GetStatus(): this command can be issued at any time and the device returns the status of the device. The command GetStatus() is not strictly necessary since device returns status information also on command bytes. The status byte returned is described in Table 13-76. The SPI transaction for the command GetStatus() is given in the following table. Table 13-76: Status Bytes Definition 7 6:4 3:1 0 Reserved Chip mode Command status Reserved - 0x0: Unused 0x0: Reserved - RFU RFU 0x2: STBY_RC 0x2: Data is available to host1 1. A packet has been successfully received and data can be retrieved 0x3: STBY_XOSC 0x3: Command timeout2 2. A transaction from host took too long to complete and triggered an internal watchdog. The watchdog mechanism can be disabled by host; it is meant to ensure all outcomes are flagged to the host MCU. 0x4: FS 0x4: Command processing error3 3. Processor was unable to process command either because of an invalid opcode or because an incorrect number of parameters has been provided. 0x5: RX 0x5: Failure to execute command4 4. The command was successfully processed, however the chip could not execute the command; for instance it was unable to enter the specified device mode or send the requested data, 0x6: TX 0x6: Command TX done5 5. The transmission of the current packet has terminated Table 13-77: GetStatus SPI Transaction Byte 0 1 Data from host Opcode = 0xC0 NOP Data to host RFU Status |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |