| Electronic Components Datasheet Search |
|
SH7713 Datasheet(PDF) 280 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
SH7713 Datasheet(HTML) 280 Page - Renesas Technology Corp |
|
280 / 904 page ![]() Section 8 Interrupt Controller (INTC) Rev.1.50 Aug. 30, 2006 Page 240 of 860 REJ09B0288-0150 The interrupt mask bits (I3 to I0) in the status register are not affected by on-chip peripheral module interrupt handling. 8.3.5 Interrupt Exception Handling and Priority There are four types of interrupt sources: NMI, IRQ, IRL, and on-chip peripheral modules. The priority of each interrupt source is set within priority levels 0 to 16; level 16 is the highest and level 1 is the lowest. When the priority is set to level 0, that interrupt is masked and the interrupt request is ignored. Tables 8.2 and 8.3 list the codes for the interrupt event registers (INTEVT and INTEVT2) and the order of interrupt priority. Each interrupt source is assigned a unique code by INTEVT or INTEVT2. The start address of the interrupt service routine is common for each interrupt source. This is why, for instance, the value of INTEVT or INTEVT2 is used as an offset at the start of the interrupt service routine and branched to in order to identify the interrupt source. IRQ interrupt and on-chip peripheral module interrupt priorities can be set freely between 0 and 15 for each module by setting interrupt priority registers A to I (IPRA to IPRI). A reset assigns priority level 0 to IRQ and on-chip peripheral module interrupts. If the same priority level is assigned to two or more interrupt sources and interrupts from those sources occur simultaneously, their priority order is the default priority order indicated at the right in tables 8.2 and 8.3. Table 8.2 Interrupt Exception Handling Sources and Priority (IRQ Mode) Interrupt Source Interrupt Code* 1 Interrupt Priority (Initial Value) IPR (Bit Numbers) Priority within IPR Setting Unit Default Priority NMI H ′1C0*2 16 High H-UDI H ′5E0*2 15 IRQ0 H ′600*3 0 to 15 (0) IPRC (3 to 0) IRQ1 H ′620*3 0 to 15 (0) IPRC (7 to 4) IRQ2 H ′640*3 0 to 15 (0) IPRC (11 to 8) IRQ3 H ′660*3 0 to 15 (0) IPRC (15 to 12) IRQ4 H ′680*3 0 to 15 (0) IPRD (3 to 0) IRQ IRQ5 H ′6A0*3 0 to 15 (0) IPRD (7 to 4) Low |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |