TS68302VR16 datasheet(43/47 Pages) ATMEL

43 / 47 page

TS68302

2117A–HIREL–11/02

Preparation For

Delivery

Packaging

Microcircuits are prepared for delivery in accordance with MIL-STD-1835.

Certificate of Compliance Atmel offers a certificate of compliance with each shipment of parts, affirming the prod-

ucts are in compliance either with MIL-STD-883 or Atmel standards and guaranteeing

the parameters are tested at extreme temperatures for the entire temperature range.

Handling

MOS devices must be handled with certain precautions to avoid damage due to accu-

mulation of static charge. Input protection devices have been designed in the chip to

minimize the effect of this static buildup. However, the following handling practices are

recommended:

a) Device should be handled on benches with conductive and grounded surfaces.

b) Ground test equipment, tool and operator.

c) Do not handle devices by the leads.

d) Store devices in conductive foam or carriers.

e) Avoid use of plastic, rubber, or silk in MOS areas.

f) Maintain relative humidity above 50%, if practical.

TS68302VR16 Datasheet(PDF) 43 Page - ATMEL Corporation