ADP3182

Rev. 0 | Page 6 of 20

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

VCC

−0.3 V to +15 V

FBRTN

−0.3 V to +0.3 V

EN, DELAY, ILIMIT, RT,

PWM1 to PWM3, COMP

−0.3 V to 5.5 V

SW1 to SW3

−5 V to +25 V

All Other Inputs and Outputs

−0.3 V to VCC + 0.3 V

Storage Temperature

−65°C to +150°C

Operating Ambient Temperature Range

0°C to 85°C

Operating Junction Temperature

125°C

Thermal Impedance (

θ

JA

)

100°C/W

Lead Temperature

Soldering (10 s)

300°C

Infrared (15 s)

260°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only and functional operation of the device at these or

any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability. Absolute maximum ratings apply individually

only, not in combination. Unless otherwise specified, all other

voltages are referenced to GND.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.