WM8986GECOSLASHV datasheet(37/87 Pages) WOLFSON

37 / 87 page

Pre-Production

WM8986

PP, Rev 3.1, February 2007

3D STEREO ENHANCEMENT

The WM8986 has a digital 3D enhancement option to increase the perceived separation between the

left and right channels. The DEPTH3D setting controls the degree of stereo expansion.

ADDRESS

BIT

LABEL

DEFAULT

DESCRIPTION

R41 (29h)

3D Control

3:0

DEPTH3D

0000

Stereo depth

0000 = Disabled

0001 = 6.67%

0010 = 13.3%

0011 = 20%

0100 = 26.7%

0101 = 33.3%

0110 = 40%

0111 = 46.6%

1000 = 53.3%

1001 = 60%

1010 = 66.7%

1011 = 73.3%

1100 = 80%

1101 = 86.7%

1110 = 93.3%

1111 = 100% (maximum 3D effect)

Table 21 3D Stereo Enhancement Function

Note

: When 3D enhancement is used, it may be necessary to attenuate the signal by 6dB to avoid

limiting.

ANALOGUE OUTPUTS

The WM8986 has three sets of stereo analogue outputs. These are:

•

LOUT1 and ROUT1 which are normally used to drive a headphone load.

•

LOUT2 and ROUT2 – which can be used as class D or class AB headphone

drivers.

•

OUT3 and OUT4 – can be configured as a stereo line out (OUT3 is left output and

OUT4 is right output) or a differential output. OUT4 can also be used to provide a

mono mix of left and right channels.

The outputs LOUT2 and ROUT2 are powered from AVDD2 and are capable of driving a 1V rms

signal (AVDD1/3.3).

LOUT1, ROUT1, OUT3 and OUT4 are powered from AVDD1

LOUT1, ROUT1, LOUT2 and ROUT2 have individual analogue volume PGAs with -57dB to +6dB

gain ranges.

There are four output mixers in the output signal path, the left and right channel mixers which control

the signals to headphone (and optionally the line outputs) and also dedicated OUT3 and OUT4

mixers.

LEFT AND RIGHT OUTPUT CHANNEL MIXERS

The left and right output channel mixers are shown in Figure 21. These mixers allow the analogue

inputs and the DAC left and right channels to be combined as desired. This allows a mono mix of the

DAC channels to be performed as well as mixing in external line-in from the AUX or speech from the

input PGAs.

The AUX and PGA path inputs have individual volume control from -15dB to +6dB and the DAC

volume can be adjusted in the digital domain if required. The output of these mixers is connected to

both the headphone (LOUT1 and ROUT1) and class D headphone (LOUT2 and ROUT2) and can

optionally be connected to the OUT3 and OUT4 mixers.

WM8986GECO/V Datasheet(PDF) 37 Page - Wolfson Microelectronics plc

WM8986GECO/V Datasheet(HTML) 37 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

Datasheet Download

Link URL