Electronic Components Datasheet Search
  English  ▼

X  

PCD5008 Datasheet(PDF) 16 Page - NXP Semiconductors

Part # PCD5008
Description  FLEX Pager Decoder
PDF  64 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  PHILIPS [NXP Semiconductors]
Direct Link  http://www.nxp.com
Logo PHILIPS - NXP Semiconductors

PCD5008 Datasheet(HTML) 16 Page - NXP Semiconductors

Back Button PCD5008 Datasheet HTML 12Page - NXP Semiconductors PCD5008 Datasheet HTML 13Page - NXP Semiconductors PCD5008 Datasheet HTML 14Page - NXP Semiconductors PCD5008 Datasheet HTML 15Page - NXP Semiconductors PCD5008 Datasheet HTML 16Page - NXP Semiconductors PCD5008 Datasheet HTML 17Page - NXP Semiconductors PCD5008 Datasheet HTML 18Page - NXP Semiconductors PCD5008 Datasheet HTML 19Page - NXP Semiconductors PCD5008 Datasheet HTML 20Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 16 / 64 page
background image
1998 Jun 17
16
Philips Semiconductors
Product specification
FLEX
™ Pager Decoder
PCD5008
8.4.3
CONFIGURATION SEQUENCE
A typical configuration and synchronisation sequence
would be as follows, see Fig.11 for event timings:
1. The PCD5008 is reset by the host.
2. After 1 second the PCD5008 interrupts the host to
read the part ID by pulling the READY line LOW.
3. The host pulls SS LOW at the start of each
SPI transfer and clocks out the part ID data.
4. The host configures the following aspects of PCD5008
operation:
a) General configuration (Section 8.4.4)
b) Receiver operation (Section 8.5)
c) FLEX
™ CAPCODE configuration (Section 8.6).
The PCD5008 writes a part ID packet in response to
each incoming packet.
5. At the end of each packet the PCD5008 pulls the
READY line HIGH, and then LOW again to indicate
that packet processing is complete.
6. The host writes a control packet to enable FLEX
™
decoding in the PCD5008 (Section 8.4.7).
7. The host writes a checksum packet to enable SPI data
output by the PCD5008 (Section 8.4.2).
8. On recognising a SYNC word, the PCD5008
synchronises to the channel.
9. The PCD5008 initiates an SPI transfer writing the
status packet, indicating that it is now in synchronous
mode.
Fig.11 Typical configuration and synchronisation sequence.
handbook, full pagewidth
MBK097
SPI
DECODER-TO-HOST
RESET
READY
SS
FLEX DATASTREAM
SPI
HOST-TO-DECODER
checksum packet (7)
control packet (6)
partid packet (4)
configuration packets
(addresses, receiver etc.)
status packet (9)
partid packet (4)
(1)
(2)
(3)
(5)
(5)
(5)
(8)
SYNC
Numbers within parenthesis refer to sequence numbers, see Section 8.4.3.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com