7200 datasheet(16/44 Pages) ARISTA

16 / 44 page

•

Each chassis side has attachment pins that align with bracket holes. Pin orientation is symmetric and

equidistant, supporting bracket placements where the flange is flush with the front panel, flush with the

rear panel, or not flush with either panel. Each bracket hole includes a key opening for placing the bracket

flush with the chassis and then locking it into place.

Important:

Attachment pins must engage all three upper bracket holes.

Goupilles de fixation doivent être bloquer tous les trois trous de la bride supérieure.

3.2.1

Attaching Mounting Brackets to the Chassis (Two-post)

This section describes the steps to attach mounting brackets to the router chassis.

The following figure displays the front bracket alignment for attaching the router to a two-post rack.

Figure 3-10: Bracket Mount Configuration for Two-post Rack Mount (Example)

Figure 3-11: Attaching the Mounting Brackets

Bracket clip installation

Bracket clip removal

The following figure displays improper bracket mounts for two-post rack mounts.

7200 Datasheet(PDF) 16 Page - Arista Networks, Inc