AS3525 datasheet(65/194 Pages) AMSCO

65 / 194 page

AS3525-A/-B C22O22

Data Sheet, Confidential

www.austriamicrosystems.com

Revision 1.13

- 194

7.3.9 SPDIF interface

As part of the I2SIN module also a SPDIF receiver interface is included. This SPDIF interface works as converter from SPDIF-AES/EBU to I2S.

The SPDIF-AES/EBU standard is a serial audio interface that conveys 2 time-multiplexed audio channels, the left and right channels, as is the case

in audio stereo transmission. The two channels are encoded in a 64-bit frame. Each individual channel is encoded in a sub-frame that consists of a

4-bit preamble, followed by 24 bits of audio data and 4 control bits, in a total of 32 bits per sub-frame. The SPDIF-AES/EBU standard provides for

LSB first, up to 24-bit audio samples, Samples of 20 bits or less may be used, in which case the 4 least significant bits may be used for a 12-bit

monitoring channel, transmitted at 1/3 of the sample rate. Please refer to the SPDIF-AES/EBU, AES3 or IEC958 standard documentation for more

information.

Features

•

Feed-forward operation: extracts audio data from the SPDIF-AES/EBU input signal by sampling it with a fast clock signal

which not necessarily related to the sample rate frequency

•

Purely digital receiver solution, without need of an input PLL for synchronisation.

•

The audio samples are output serially in I2S format.

•

PLL interface to filter out the jitter and generate a jitter-free I2S output.

•

Recognizes all common audio and video related sample frequencies and outputs a nibble code for each.

7.3.9.1 SPDIF register description

Table 48 SPDIF status register

Name

Base

Default

I2SIN_SPDIF_STATUS

AS3525_I2SIN_BASE

0x00

SPDIF status signals register

Offset: 0x0018

This read-only register contains status information of the SPDIF interface. The

spdif_sample_freq and spdif_sync status bits are directly derived from the SPDIF

converter. In order to provide valid status bits, these signals must be synchronized

with pclk, i.e. clk_i2sin.

Bit

Bit Name

Default

Access

Bit Description

4:1

spdif_sample_freq

Incoming sample frequency

spdif_sync

Recognition of sub-frame preamble

0: first sub-frame preamble not recognized

1: successful recognition of the first sub-frame preamble

The following table shows the input sample rate in KHz according to the sample_freq_code (bit 5 to 1) in the I2SIN_SPDIF register.

sample_freq_code

Input Sample Rate (KHz)

0001

22.050

0010

24.000

0011

32.000

0100

44.100

0101

48.000

0110

64.000

0111

88.200

1000

96.000

1001

176.400

1010

192.000

AS3525 Datasheet(PDF) 65 Page - ams AG

AS3525 Datasheet(HTML) 65 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL