| Electronic Components Datasheet Search |
|
WM8352 Datasheet(PDF) 79 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8352 Datasheet(HTML) 79 Page - Wolfson Microelectronics plc |
|
79 / 336 page ![]() Production Data WM8352 w PD, February 2011, Rev 4.4 79 13.8 OUTPUT SIGNAL PATH The analogue output pins produce audio signals to drive headphones, line-out connections and/or external loudspeaker amplifiers. These pins include: OUT1L and OUT1R OUT2L and OUT2R OUT3 and OUT4 OUT1L, OUT1R, OUT2L and OUT2R have individual analogue volume PGAs with -57dB to +6dB ranges. AC-coupled and Capless headphone drive modes are available. Common mode noise rejection is possible using the HPCOM connection. OUT3 and OUT4 can be configured as a stereo line out (OUT3 is left output and OUT4 is right output). OUT3 and OUT4 can also be used as a Vmid buffer to provide a “ground” reference for headphone outputs, eliminating the need for DC blocking capacitors. Alternatively, OUT4 can be used to provide a mono mix of left and right channels. All analogue output pins are powered through the HPVDD and HPGND pins. Each output can drive a headphone load down to 16 Ω. There are four output mixers in the output signal path: the left and right channel mixers which control the signals to headphone (and optionally the line outputs) and also dedicated OUT3 and OUT4 mixers. 13.8.1 ENABLING THE ANALOGUE OUTPUTS Each output can be individually enabled or disabled via dedicated control bits. ADDRESS BIT LABEL DEFAULT DESCRIPTION R10 (0Ah) 0 OUT1L_ENA 0 OUT1L enable 0 = disabled 1 = enabled R104 (68h) 15 R10 (0Ah) 1 OUT1R_ENA 0 OUT1R enable 0 = disabled 1 = enabled R105 (69h) 15 R10 (0Ah) 2 OUT2L_ENA 0 OUT2L enable 0 = disabled 1 = enabled R106 (70h) 15 R10 (0Ah) 3 OUT2R_ENA 0 OUT2R enable 0 = disabled 1 = enabled R107 (71h) 15 R9 (09h) 4 OUT3_ENA 0 OUT3 enable 0 = disabled 1 = enabled R92 (5Ch) 15 R9 (09h) 5 OUT4_ENA 0 OUT4 enable 0 = disabled 1 = enabled R93 (5Dh) 15 Note: Each bit can be accessed through two separate control registers. Reading from or writing to either register location has the same effect. Table 37 Enabling the Analogue Outputs |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |