AS8228 datasheet(16/123 Pages) AMSCO

16 / 123 page

Data Sheet AS8218 / AS8228

Revision 3.0, 31-May-06

Page 16 of 123

8.1

Energy Measurement Front End (Including DSP)

The Energy Measurement Front End is made up of the analog front end and the digital signal processing block

(DSP), which performs the active energy measurement calculations for the microcontroller.

The analog front end comprises of the three Sigma-Delta modulators for the sampling of the mains voltage,

Line current and a second current channel, for the optional measurement of the Neutral current. Also included

in the analog front end is the voltage reference, which provides the temperature stability to the Sigma-Delta

modulators. Setting up for the optimum input conditions for the voltage and current channels is also described

in this section.

The digital signal processing block (DSP) provides the filtering and processing of the output data from the

sigma-delta modulators and ensures that the specified measurement accuracy is provided by the AS8218 /

AS8228. The DSP offers programming flexibility and provides for fast and efficient meter production calibration

procedures.

A power supply monitor (PSM) is also described in this section. The PSM ensures that a reset is generated

independently of the rise and fall times of the supply voltage (VDD).

Analog Front End

The analog front end comprises of three identical Sigma-Delta modulators, which convert the differentially

connected analog voltage and current inputs into digital signals. The two current inputs are gain adjustable to

accommodate both directly connected or galvanically isolated current sensors.

The on-chip voltage reference (VREF) is the most important contributor to the accuracy of the AS8218 /

AS8228 ICs due to it providing temperature stability to the circuit. Considering that the voltage and current

signals are multiplied to derive the energy value, errors introduced prior to multiplication function results in

errors being multiplied. Thus the introduction of errors into the voltage and the current channel inputs will result

in a doubling of the percentage error after multiplication at the energy output.

The temperature coefficient of the VREF is specified at 30 ppm/K typical.

Voltage Reference Specifications

Parameter

Symbol

Min

Typ

Max

Unit

Notes

Output voltage

Vref

1.217

1.219

1.221

Temperature coefficient

ppm/K

Current Inputs for Energy Calculation

The AS8218 / AS8228 ICs have 2 identical mains current inputs, I1P/I1N and I2P/I2N, for measurement of both

the Live and Neutral currents. Either of the two current inputs may be selected for calculating the energy value.

These two differential current inputs are second order Sigma-Delta modulators, with each of the inputs being

provided with selectable gains of 4, 16 and 20. The selectable gains are provided so that the AS8218 / AS8228

ICs may be easily adapted for use with either 2 current transformers or alternatively a shunt resistor and a

current transformer for current sensing. The AS8218 / AS8228 ICs may also be used in a conventional single

current configuration with either a current transformer or shunt resistor being used for current sensing.

AS8228 Datasheet(PDF) 16 Page - ams AG

AS8228 Datasheet(HTML) 16 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL