| Electronic Components Datasheet Search |
|
AS8228 Datasheet(PDF) 41 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
AS8228 Datasheet(HTML) 41 Page - ams AG |
|
41 / 123 page ![]() Data Sheet AS8218 / AS8228 Revision 3.0, 31-May-06 Page 41 of 123 Control / Status 1 Register (9110h) MSB LSB - - - WAIT - - - - Bit Symbol Function 7 - Not used 6 - Not used 5 - Not used 4 WAIT Indicates that RTC is waiting for a start signal. The start signal is WAIT being reset to 0. WAIT = 0 RTC running normally. (Clear by MCU.) WAIT = 1 Is set when time/calendar information is changed (access to registers 9100h to 9106h). While RTC is waiting for a start signal, 1Hz clock is still gated to the MPIOs. 3 - Not used 2 - Not used 1 - Not used 0 - Not used Register bit assignment: (Unassigned bits in the registers are marked with ‘-‘. If these bits are read they will return zero value. Writing these bits has no effect.) Control / Status 2 Register (9111h) MSB LSB TSA - A2F A1F STF AIE2 AIE1 SIE Bit Symbol Function 7 TSA Time Setting Alarm: Indicates when an impossible time/date has been set and it has been corrected by the RTC automatically, e.g. 31 st February 1 st February. An interrupt will be generated and TSA is set to 1. The interrupt is cleared by setting TSA=0 (done by MCU (software)). 6 - Not used 5 A2F Set to logic 1 when an alarm 2 occurs and maintains this value until software clears it. Indicates the source of the interrupt. Cannot be set by software. When the flag is cleared, also the interrupt is cleared. 4 A1F Set to logic 1 when an alarm 1 occurs and maintains this value until software clears it. Indicates the source of the interrupt. Cannot be set by software. When the flag is cleared, also the interrupt is cleared. 3 STF Set to logic 1 when a seconds timer interrupt occurs and maintains this value until software clears it. Indicates the source of the interrupt. Cannot be set by software. When the flag is cleared, also the interrupt is cleared. 2 AIE2 AIE2 = 0; alarm 2 interrupt disabled AIE2 = 1; alarm 2 interrupt enabled 1 AIE1 AIE1 = 0; alarm 1 interrupt disabled AIE1 = 1; alarm 1 interrupt enabled 0 SIE SIE = 0; seconds counter interrupt disabled SIE = 1; seconds counter interrupt enabled |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |