ST72F262G2B5 datasheet(37/172 Pages) STMICROELECTRONICS

Part #	ST72F262G2B5

Description	8-BIT MCU WITH FLASH OR ROM MEMORY, ADC, TWO 16-BIT TIMERS, I2C, SPI, SCI INTERFACES

Download	172 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

37 / 172 page

ST72260Gx, ST72262Gx, ST72264Gx

37/172

POWER SAVING MODES (Cont’d)

8.5.0.1 Halt Mode Recommendations

– Make sure that an external event is available to

wake up the microcontroller from Halt mode.

– When using an external interrupt to wake up the

microcontroller, reinitialize the corresponding I/O

as “Input Pull-up with Interrupt” before executing

the HALT instruction. The main reason for this is

that the I/O may be wrongly configured due to ex-

ternal interference or by an unforeseen logical

condition.

– For the same reason, reinitialize the level sensi-

tiveness of each external interrupt as a precau-

tionary measure.

– The opcode for the HALT instruction is 0x8E. To

avoid an unexpected HALT instruction due to a

program counter failure, it is advised to clear all

occurrences of the data value 0x8E from memo-

ry. For example, avoid defining a constant in

ROM with the value 0x8E.

– As the HALT instruction clears the interrupt mask

in the CC register to allow interrupts, the user

may choose to clear all pending interrupt bits be-

fore executing the HALT instruction. This avoids

entering other peripheral interrupt routines after

executing the external interrupt routine corre-

sponding to the wake-up event (reset or external

interrupt).

Similar Part No. - ST72F262G2B5

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	ST72F262G2B6	2Mb / 171P	8-BIT MCU WITH FLASH OR ROM MEMORY, ADC, TWO 16-BIT TIMERS, I2C, SPI, SCI INTERFACES August 2003 Rev. 1.7
STMicroelectronics	ST72F262G2B6	1Mb / 172P	8-BIT MCU WITH FLASH OR ROM MEMORY, ADC, TWO 16-BIT TIMERS, I2C, SPI, SCI INTERFACES

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	ST72260G	2Mb / 171P	8-BIT MCU WITH FLASH OR ROM MEMORY, ADC, TWO 16-BIT TIMERS, I2C, SPI, SCI INTERFACES August 2003 Rev. 1.7
	ST72260GX	1Mb / 172P	8-BIT MCU WITH FLASH OR ROM MEMORY, ADC, TWO 16-BIT TIMERS, I2C, SPI, SCI INTERFACES
	ST72334J	1Mb / 153P	8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, ADC, 16-BIT TIMERS, SPI, SCI INTERFACES
	ST72334J	1,022Kb / 125P	8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, ADC, 16-BIT TIMERS, SPI, SCI INTERFACES
	ST72334XX-AUTO	3Mb / 150P	8-bit MCU for automotive with single voltage Flash/ROM memory, ADC, 16-bit timers, SPI, SCI interfaces
	ST72340	3Mb / 191P	8-BIT MCU WITH UP TO 16K FLASH MEMORY, 10-BIT ADC, TWO 16-BIT TIMERS, TWO I2C, SPI, SCI
	ST72104G	909Kb / 135P	8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, ADC, 16-BIT TIMERS, SPI, I2C INTERFACES February 2000 Rev. 2.2
	ST72104GX-AUTO	3Mb / 135P	8-bit MCU for automotive with single voltage Flash/ROM memory, ADC, 16-bit timers, SPI, I2C interfaces
	ST72325	3Mb / 196P	8-bit MCU with 16 to 60K Flash/ROM, ADC, CSS, 5 timers, SPI, SCI, I2C interface
	ST7232A	1Mb / 154P	8-BIT MCU WITH 8K FLASH/ROM, ADC, 4 TIMERS, SPI, SCI INTERFACE