Electronic Components Datasheet Search
  English  ▼

X  

UPD7228 Datasheet(PDF) 15 Page - NEC

Part # UPD7228
Description  1/8, 1/16 DUTY LCD CONTROLLER/DRIVER
PDF  39 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  NEC [NEC]
Direct Link  http://www.nec.com/
Logo NEC - NEC

UPD7228 Datasheet(HTML) 15 Page - NEC

Back Button UPD7228 Datasheet HTML 11Page - NEC UPD7228 Datasheet HTML 12Page - NEC UPD7228 Datasheet HTML 13Page - NEC UPD7228 Datasheet HTML 14Page - NEC UPD7228 Datasheet HTML 15Page - NEC UPD7228 Datasheet HTML 16Page - NEC UPD7228 Datasheet HTML 17Page - NEC UPD7228 Datasheet HTML 18Page - NEC UPD7228 Datasheet HTML 19Page - NEC Next Button
Zoom Inzoom in Zoom Outzoom out
 15 / 39 page
background image
Data Sheet S10299EJ4V0DS00
15
µµµµ PD16434
2.5 Data Memory
The data memory is a static RAM configured by two 50-word
× 8-bit banks. It is used for storing display data.
Figure 2–5. Data Memory Configuration
Bank 0
(50 x 8)
Bank 1
(50 x 8)
00H
31H
00H
31H
The data memory bank is specified by the bank flag in the data pointer, and the address in the bank is specified
by the 6-bit binary counter in the data pointer.
The 8-bit data, written to the serial/parallel interface by the CPU, is used for operation or decoded according to
the specified data processing mode, and is written into the data memory.
The data memory contents can be directly manipulated by a bit manipulation instruction.
When the
µ PD16434 is set in the read mode, the data memory contents are output to the CPU through the
serial/parallel interface.
The data memory contents are read out in bit units in synchronization with the row drive signal and are sent to the
column driver for driving the LCD. This operation is performed independently from command/data write/read operation
with the CPU, which is performed through the serial/parallel interface. Display data read out operation differs,
depending on the number of time-divisions.
(1) 8-time-division (single/multi-chip configuration)
The contents of the display data in bank 0 or bank 1, whichever is specified by the SMM command, are read
out to the column driver.
Figure 2–6 shows bits correspondence for the row driver and column driver for the data memory. If the data
located at the Rn and Cm intersection is 1, the corresponding LCD dot is ON. If the data is 0, the dot is OFF.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com