| Electronic Components Datasheet Search |
|
ML7020 Datasheet(PDF) 10 Page - OKI electronic componets |
|
|
|||||||||||||||||||||||||||||
ML7020 Datasheet(HTML) 10 Page - OKI electronic componets |
|
10 / 19 page ![]() FEDL7020-02 1Semiconductor ML7020 10/19 Figure 3 DTMF reception timing t s: Input signal persistence duration (detection) Normal reception is made when the input signal persistence duration is equal to t s or more. t I: Input signal persistence duration (non-detection) The input signal is ignored when the input signal persistence duration is less than t I, and the SP and DTMF receive data are not output. t p: Signal quiet duration The DTMF receive data and SP are reset if the input continues to be in the no-signal condition for a duration equal to t p or longer. Also, even if the receive data changes during DTMF signal reception, SP continues to be “1” and the DTMF receive data may remain in the initial value and may not change, if the signal quiet duration is less than t p (including when it changes without any instantaneous break). t ba: Instantaneous break protection period 1 This is applicable to the period after the input signal has arrived and until the timing when SP becomes “1”. In other words, SP and DTMF receive data are output normally even if a no-signal condition of a duration less than t ba occurs. t bb: Instantaneous break protection period 2 This is applicable when SP is “1” (during output of the receive data). In other words, SP and the DTMF receive data are not reset even if a no-signal condition of a duration less than t bb occurs during signal reception. t c: For ensuring normal reception, make sure that the signal repetition period is equal to t c or more. t g: Detection delay time The DTMF receive data is output with a delay of t g relative to the appearance of the input signal. t d: Detection hold time The output of SP or the DTMF receive data is stopped with a delay of t d after the termination of the input signal. t sp: SP delay time SP is output after a delay of t sp relative to the output of the DTMF receive data. Therefore, latch the DTMF receive data when the rising edge of SP is detected. t s t p t c t bb t d t g DTMF signal DTMF receive data SP t l t sp t ba |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |