PFS154 datasheet(40/91 Pages) PADAUK

40 / 91 page

PFS154

8bit MTP Type IO Controller

Page 40 of 91

PDK-DS-PFS154_CN_V105 –Jun. 9, 2020

5.8.3

Wake-up

After entering the Power-Down or Power-Save modes, the PFS154 can be resumed to normal operation by

toggling IO pins. Wake-up from timer are available for Power-Save mode ONLY. Table 6 shows the

differences in wake-up sources between STOPSYS and STOPEXE.

Differences in wake-up sources between STOPSYS and STOPEXE

IO Toggle

Timer wake-up

STOPSYS

Yes

STOPEXE

Yes

Table 6: Differences in wake-up sources between Power-Save mode and Power-Down mode

When using the IO pins to wake-up the PFS154, registers pxdier should be properly set to enable the

wake-up function for every corresponding pin. The time for normal wake-up is about 3,000 ILRC clocks

counting from wake-up event; fast wake-up can be selected to reduce the wake-up time by misc register, and

the time for fast wake-up is about 45 ILRC clocks from IO toggling.

Suspend mode

Wake-up mode

Wake-up time (tWUP) from IO toggle

STOPEXE suspend

STOPSYS suspend

Fast wake-up

45 * TILRC,

Where TILRC is the time period of ILRC

STOPEXE suspend

STOPSYS suspend

Normal wake-up

3000 * TILRC,

Where TILRC is the clock period of ILRC

Please notice that when Code Option is set to Fast boot-up, no matter which wake-up mode is selected in

misc.5, the wake-up mode will be forced to be FAST. If Normal boot-up is selected, the wake-up mode is

determined by misc.5.

PFS154 Datasheet(PDF) 40 Page - PADAUK Technology.